![SP-7 Dining Table by Schwab/Panther](https://static.dezeen.com/uploads/2011/02/dzn_SP-7-Dining-Table-by-SchwabPanther-6.jpg)
SP-7 Dining Table by Schwab/Panther
Cologne 2011: German designers Schwab/Panther presented this dining table comprising five wire frames held together under tension as part of [D3] Design Talents at imm cologne in Germany.
![SP-7 Dining Table by Schwab/Panther SP-7 Dining Table by Schwab/Panther](https://static.dezeen.com/uploads/2011/02/dzn_SP-7-Dining-Table-by-SchwabPanther-5.jpg)
Called SP-7 Dining Table, the design is made of 12mm steel wire and a glass top.
![SP-7 Dining Table by Schwab/Panther SP-7 Dining Table by Schwab/Panther](https://static.dezeen.com/uploads/2011/02/dzn_SP-7-Dining-Table-by-SchwabPanther-4.jpg)
The pair showed a coffee table version of the design last year (above and below).
![SP-7 Dining Table by Schwab/Panther SP-7 Dining Table by Schwab/Panther](https://static.dezeen.com/uploads/2011/02/dzn_SP-7-Dining-Table-by-SchwabPanther-7.jpg)
imm cologne took place 18-23 January. See all the stories about the event in our special category.
![SP-7 Dining Table by Schwab/Panther SP-7 Dining Table by Schwab/Panther](https://static.dezeen.com/uploads/2011/02/dzn_SP-7-Dining-Table-by-SchwabPanther-1.jpg)
The information that follows is from Schwab/Panther:
Schwab/Panther showed their new product SP-7 dining table at the furniture fair 2011 on the [D3] Contest booth, which was curated by the German Design Counsel.
SP-7 lounge table
The four piece bent-wire frame of SP-7 coffee table is held together by tension and pressure only. Therefore the possibility of combining different coloured pieces is given as well as free choice of covers for the table.
![SP-7 Dining Table by Schwab/Panther SP-7 Dining Table by Schwab/Panther](https://static.dezeen.com/uploads/2011/02/dzn_SP-7-Dining-Table-by-SchwabPanther-2.jpg)
The same concept is used for the SP-7 dining table. It has 5 pieces and is bent in 12mm steel wire.
![SP-7 Dining Table by Schwab/Panther SP-7 Dining Table by Schwab/Panther](https://static.dezeen.com/uploads/2011/02/dzn_SP-7-Dining-Table-by-SchwabPanther-3.jpg)
The frame is CNC-bent, weight is 3.5 kg (coffee table), 7kg for the dining table. The finish will be a polyamide coating.
See also:
.
![]() |
![]() |
![]() |
Pylône by Linn Kandel |
TSAR by Florian Brillet |
Arc table by Foster + Partners |